Skip Navigation Website Accessibility
 
 

RipTide Barrel Bushing APS

DURO:
   
Quantity:    

Add to Cart

Sold as Pair with Sticker. 

  • .975" Dia x .60" High (24.77mm Dia x 15.24mm High)
  • APS rides a couple of points softer than they test, so order accordingly
  • Hard durometer bushings (95a - 97.5a) are for heavier-weight riders (over 125lbs) and allow for a nice tight set-up.
  • Medium durometer bushings (85a - 90a) are for medium-weight riders (75 - 125lbs) & those looking for a looser setup in the RoadSide position when coupled with a harder duro bushing.
  • Soft durometer bushings (75a - 85a) are for light-weight riders & those looking for a loose setup in the RoadSide position.
  • Super-soft durometer bushings (60a - 70a) are designed for very light-weight or young riders and are also fun for those looking for a really loose setup in the RoadSide position.

APS™ Formula:  Animated Polymer System

As the name implies, this compound is very lively and offers high rebound with lots of control and lean.  For the same durometer, the APS will turn 10% to 15% more than the same durometer of other brands.  In addition, the APS does not change much when you tighten the kingpin nut past snug.  We recommend tightening to the point where it is difficult to turn the bushing in the bushing seat by hand.  Use a flat washer for lower resistance and a cupped washer for higher resistance.



truck-application-chart-v2.jpg




Events

Below is where we will post our current or upcoming events. These events may be held at or put on by Pinewski's. Some may even be events in the industry that we think you should go check out. If there is nothing below, unfortunately we do not have anything to share. So if you have an event you think we would be interested in, or would like to see posted here, please do share!

Master Shredder 9 2020 at Trollhaugen